Step 1: Remove Screws

Remove the 2 Phillips head screws at the top of each grille vane insert.

Step 2: Remove Vane

Pull vane assembly forward and upwards to remove.

Step 3: Remove Clips

Remove clips are upper openings of grille surround at points where Phillips screws were removed

Step 4: Install New Clips

Install clips supplied with grille mesh with flat side facing forward

Step 5: Install Mesh Inserts

Install mesh inserts by inserting lower alignment tabs into corresponding slots in lower portion of grille surround openings.

Step 6: Secure Mesh

Secure top of grille mesh inserts by inserting the Phillips screws included with new clips through the top screw holes on face of mesh and into the clips installed on Step 4.